Clinical practice guideline of the Spanish society of oral surgery for dental care in patients with oral cancer.

BACKGROUND: Oral cancer is the sixteenth most common malignant neoplasm worldwide, with a high mortality rate, greater than 50% at five years, and high morbidity. The effect of oncological treatment in the oral cavity is broad and has multiple levels, therefore knowing these effects and preventing them is essential for avoiding an increase in the oral pathology related with oncological therapy, maintaining the quality of life of the patient, and improving the efficacy of the treatment itself. MATERIAL AND METHODS: A group of experts belonging to the fields of Dentistry, Maxillofacial Surgery and Oncology of the University of Seville and the Virgen del Rocío University Hospital of Seville in collaboration with the University of Valencia, University of Barcelona, and University of the Basque Country, developed this Clinical Practice Guideline for the proper clinical management of patients diagnosed with oral cancer. The clinical questions were formulated in PICO format. The databases consulted were Medline/PubMed and Embase/Elsevier. The systematic reviews published on the topic were identified on Tripdatabase, Cochrane Library and CRD (Centre for Reviews and Dissemination). The recommendations were prepared based on the GRADE methodology. RESULTS: Various recommendations were defined, derived from the 21 PICO questions, referring to prevention, treatment and care for alterations arising from the pathology of oral cancer itself and its treatment. CONCLUSIONS: The preparation of this clinical practice guideline allows recommendations to be generated based on the scientific evidence available, on dentistry actions in patients with oral cancer and undergoing oncological treatment, which may be of use to the multidisciplinary team treating this type of patient.

Influence of different drilling protocols and bone density on the insertion torque of dental implants.

BACKGROUND: The insertion torque of dental implants will depend on a combination of different factors such as bone density, the design of the implant and the drilling protocol used. However, it is not clear how the interaction of these factors affects the final insertion torque and which drilling protocol should be used in each clinical situation. The aim of this work is to analyse the influence of bone density, implant diameter and implant length on the insertion torque using different drilling protocols. MATERIAL AND METHODS: An experimental study was carried out in which the maximum insertion torque was measured, in standardised polyurethane blocks (Sawbones Europe AB) of four densities, for M12 Oxtein dental implants (Oxtein, Spain) with diameters of 3.5, 4.0, 4.5 and 5mm, and lengths of 8.5mm, 11.5mm and 14.5mm. All these measurements were carried out following four drilling protocols, a standard protocol, adding a bone tap, cortical drill or conical drill. In this way, a total of 576 samples were obtained. For the statistical analysis, the table of confidence intervals, mean, standard deviation and covariance was carried out, in total and grouped by the parameters used. RESULTS: The insertion torque for D1 bone obtained very high levels, reaching 77 6.95 N/cm, these values improved with the use of conical drills. In D2 bone, the mean torque obtained was 37.89± 13.70N/cm, with values within the standard. In D3 and D4 bone significantly low torques were obtained with values of 14.97± 4.40N/cm and 9.88± 4.16N/cm (p>0.001) respectively. CONCLUSIONS: In D1 bone, conical drills must be incorporated in drilling to avoid excessive torque, while in D3 and D4 bone, these would be contraindicated, as they drastically decrease the insertion torque, which may compromise the treatment.

Active unilateral condylar hyperplasia: Assessment of the usefulness of single photon emission computed tomography.

BACKGROUND: This study aims to evaluate whether the uptake difference by the condyles evaluated using single photon emission computed tomography (SPECT) examination is useful for predicting the activity of the feature and the advance of this pathology. MATERIAL AND METHODS: An observational and prospective study has been carried out on nine patients affected by unilateral condylar hyperplasia (UCH) with complete bone maturation, with a follow-up over 18 months. At the beginning of the study, a test-battery was conducted including dental casts, articular examination, teleradiography and cephalometry, computed tomography and SPECT, creating two groups of patients from a difference in uptake between both condyles greater than 10% over the follow-up period. Evolution of data obtained with the rest of the diagnostic tests were compared to confirm UCH activity predicted by SPECT. RESULTS: The comparison of both groups did not show hardly any significant differences, with little clinical significance. Deviation of the mandibular line, the size of the branches or condyles behaved similarly in both study groups. CONCLUSIONS: From the data obtained in our study, we can conclude that the use of the difference in uptake between both condyles by applying the SPECT technique is not a valid approach for predicting clinical activity in cases of UCH.

Comparison of diode laser - Oral tissue interaction to different wavelengths. In vitro study of porcine periodontal pockets and oral mucosa.

BACKGROUND: The aim of this in vitro study was to evaluate the effect of diode lasers at different wavelengths and power settings in handmade incisions in periodontal pockets and in oral mucosa of porcine tissue considering thermal damage, necrosis and the affected area of the soft tissue. MATERIAL AND METHODS: Combining the following laser wavelengths, 445nm, 532nm (KTP), 810nm, 980nm, 1064nm and 1470nm, and a power range from 0.5W to 2.0W in a continuous wave mode (CW), we made handmade incisions in porcine periodontal pockets and oral mucosa. After histological processing, we measured the area of ​​lost tissue, the area of ​​thermal damage and the area of ​​necrosis. Then, we performed ANOVA to evaluate the difference between groups and two-way ANOVA to identify the influence of the laser-type variables and the power on the results. RESULTS: We applied an ANOVA test to evaluate the results, where statistical analysis showed clear differences between the 1470nm and 810nm laser groups that refer to thermal damage and necrosis in the periodontal pocket surface. Regarding the oral mucosa surface, the 1064nm laser showed differences in the analysis of lost tissue. According to the applied power, all the variables we studied (lost tissue area, area of thermal damage and necrosis) showed higher values when using a power of 2.0W instead of 0.5W. CONCLUSIONS: According to our results, the 810nm diode laser for oral soft-tissue biopsy using power ranges between 0.5W and 2W would be the best choice to avoid thermal damage in peri-incisional margins.

Straight and tilted implants for supporting screw-retained full-arch dental prostheses in atrophic maxillae: A 2-year prospective study.

BACKGROUND: To evaluate, over a 2-year period, the treatment outcomes for maxillary full-arch fixed dental prostheses (FDPs) supported by a combination of both tilted and axially-placed implants and to compare the marginal bone loss (MBL) and implant survival rates (SR) between tilted and axial implants. MATERIAL AND METHODS: A retrospective study has been carried out. Thirty-two patients (16 males and 16 females) treated with maxillary full-arch FDPs were included in this retrospective study. A total of 187 implants were inserted to rehabilitate the fully edentulous maxillary arches: 36% of them were tilted (T group, n = 68) and the remaining 64% were axially placed (A group, n = 119). From the total, 28% of the implants (n=53) were immediately loaded with screw-retained provisional acrylic restorations, whereas 72% underwent conventional delayed prosthetic loading 6 months post-operatively. Definitive restorations were hybrid implant prostheses (metal framework covered with high-density acrylic resin) and metal-ceramic screw-retained implant prostheses, and were placed 6 months after surgery. Such definitive restorations were checked for proper function and aesthetics every three months for two years. Peri-implant marginal bone levels were assessed by digital radiographs immediately after surgery and MBL was assessed at definitive implant loading (baseline) and 2 years afterwards. RESULTS: The 2-year implant SR were 100% for axially placed implants and 98.5% for tilted implants. No significant differences were found amongst the A and T implant groups. Marginal bone loss measured at 2 years after definitive prosthetic loading was of -0.73 ± 0.72 mm (maximum MBL of 1.43 mm) for axially positioned implants vs. -0.51 ± 0.92 mm for tilted implants (maximum bone 1.45 mm). Differences in MBL were statistically significant when comparing immediately and delayed loaded implants. CONCLUSIONS: Based on the results of this retrospective clinical study, full-arch fixed prostheses supported by a combination of both tilted and axially placed implants may be considered a predictable and viable treatment modality for the prosthetic rehabilitation of the completely edentulous maxilla.

Advantages of surgical simulation in the surgical reconstruction of oncological patients.

BACKGROUND: Stereolithography, which consists of computer-aided designed/computer-aided manufactured (CAD-CAM) and computer simulations, is a manufacturing technologies used for the production of definitive models and prototypes printed in three dimensions, and is widely used in Oral and Maxillofacial Surgery. Surgical procedures using models made by these technologies offer several advantages. MATERIALS AND METHODS: This article describes three clinical cases of our experiences with patients diagnosed with squamous cell carcinoma and mandibular osteosarcoma, who underwent surgical removal of the lesions and subsequent mandibular reconstruction with a free fibula graft using surgical guides. RESULTS: In all three clinical cases, surgical guides were used for the mandibular osteotomy, fibula osteotomy, and graft placement in the recipient area. DISCUSSION: Surgical guidelines are useful for improving the accuracy of surgical interventions and are appropriate for many types of resection and mandibular reconstruction.

Influence of dental treatment in place on quality of life in oral cancer patients undergoing chemoradiotherapy.

BACKGROUND: This study aims to assess, in the population of patients with oral cancer treatment, the influence on the quality of life of two protocols of dental treatment: not ruled hospital treatment versus ruled hospital treatment. Matrial and Methods: A quasi-experimental approach justified on ethical grounds was used. A total of 41 patients were included in the control group (not ruled treatment outpatient health center) and 40 in the experimental group (ruled hospital treatment). A total of 14 questions to both groups were conducted in three stages: before starting cancer treatment, during treatment and after treatment. the proportions of positive responses in groups and different times were compared using the chi-square test. RESULTS: Based on similar situations during cancer treatment were identified as six issues favorable to the experimental group difference. This number rose to nine after finishing oncological treatment. CONCLUSIONS: From our data we can confirm that planned dental treatment performed during the oral cancer treatment produces an improvement in the quality of life in patients with oral cancer.

Evolution of oral neoplasm in an andalusian population (Spain).

BACKGROUND: Head and neck cancer are one of the most common neoplasm pathologies in humans. The aim of this study was to analyze the type, characteristics, treatment and evolution of oral neoplasm or precancerous lesion in a sample of Andalusian population (Spain) derived from the Oncology Rehabilitation Hospital Unit during a period of 20 years. MATERIAL AND METHODS: A retrospective descriptive study was carried out during the years 1991 and 2011 analyzing the type, characteristics, treatment and follow-up of oral neoplasm in the Oral and Maxillofacial Surgery Unit of the Universitary Hospital Virgen del Rocio. The inclusion criteria were patients whose underlying pathology was any type of benign or malignant neoplasm or presence of precancerous lesion that, after treatment, had been referred to the Prosthetic Rehabilitation Unit. RESULTS: Of the initial analyzed sample of 60 patients, only 45 patients met the inclusion criteria. Of the final sample analyzed, 31 subjects were men (68.9%) and 14 women (31.1%) (p = 0.0169). The mean age of the sample was 57 years ± 13.83, been more frequently in older people with more than 50 years (73.3%) (p = 0.0169). The most common type of neoplasm was epidermoid carcinoma (64.4%). The site most frequently found in squamous cell carcinoma was the floor of the mouth (31%). The most frequent treatment modality was surgery with postoperative radiotherapy (42.2%). All patients had a minimum follow-up of 5 years, and a recurrence in this period was identified in 11.1% of the sample. Multivariate logistic regression showed a statistically significant association for the variables age (p = 0.0063) and smoking (p = 0.0434). CONCLUSIONS: Epidermoid carcinoma is the most frequent tumor in the oral cavity, where increase age and smoking are confirmed as associated risk factors.

Analysis of different therapeutic protocols for osteonecrosis of the jaw associated with oral and intravenous bisphosphonates.

INTRODUCTION: Chemotherapy-associated osteonecrosis of the jaw caused by bisphosphonates is an exposure of necrotic bone with more than eight weeks of evolution that is attributable to bisphosphonates and no prior radiation therapy. Its etiopathogenesis remains unknown, although there are two hypotheses that may explain it: the drug's mechanism of action, and the risk factors that can lead to osteonecrosis. There is a wide range of treatment options for managing chemotherapy-associated osteonecrosis of the jaw, from conservative treatments to surgical procedures of varying levels of invasiveness, which are sometimes supplemented with adjuvant therapies. OBJECTIVE: The objective of this article is to group the therapeutic options for osteonecrosis of the jaw (ONJ) into seven different protocols and to evaluate their effectiveness in relation to stage of ONJ. MATERIAL AND METHODS: A literature review was carried out in PubMed following the PRISMA criteria. A total of 47 were collected after compiling a series of variables that define ONJ, applied treatments, and the clinical results obtained. RESULTS AND DISCUSSION: The 47 articles selected have a low to average estimated risk of bias and are of moderate to good quality. According to the data obtained, Protocol 3 (conservative treatment, clinical and radiological follow-up, minimally invasive surgical treatment, and adjuvant therapies) is the most favorable approach for ONJ lesions caused by oral bisphosphonates. For lesions caused by intravenous bisphosphonates, Protocol 2 (conservative treatment, clinical and radiological follow-up, minimally invasive surgical treatment, and no adjuvant therapies) is the best approach. When comparing the different stages of ONJ, Protocol 1 (conservative treatment, clinical and radiological follow-up) promotes better healing of Stage 1 ONJ lesions caused by orally administered bisphosphonates, and Protocol 3 is recommended for Stage II. For ONJ lesions attributable to intravenous bisphosphonates, Protocol 7 (conservative treatment, clinical and radiological follow-up, and adjuvant therapies) provides the best results in Stage 0; in Stages I, II, and III, Protocol 1 gives better results.

Relationship between salivary biomarkers and postoperative swelling after the extraction of impacted lower third molars.

Many authors have studied various different parameters in relation to postoperative anxiety after the extraction of third molars. However, the effect that the acute inflammatory process occurring post extraction could have on these parameters has not been studied. Certain salivary biomarkers, although not specifically inflammatory, may be affected by the acute inflammatory process occurring following the extraction of a retained lower third molar. Three biomarkers were assessed in this study: total protein, immunoglobulin A (IgA), and alpha-amylase. A total of 15 patients were recruited. Four samples of saliva were taken from each patient: before extraction, immediately after extraction, at 2h after extraction, and at 7 days after extraction. The concentrations of the proteins in the saliva were measured. The average values of each marker were compared across the different stages of the study. Statistical analysis revealed that of the three salivary biomarkers, only alpha-amylase was associated with an inflammatory response to the surgery (P<0.05). These results suggest the possibility that salivary alpha-amylase levels may be affected by the acute inflammation occurring post extraction; therefore, this would not be an appropriate marker to use in the study of other situations, unless this interference is controlled for.

The effects of a topical gel containing chitosan, 0,2% chlorhexidine, allantoin and despanthenol on the wound healing process subsequent to impacted lower third molar extraction.

BACKGROUND: Despite efforts to prevent postoperative discomfort, there are still many immediate side effects associated with the surgical extraction of impacted lower third molars. Cicatrization is a physiological process through which the loss of integrity of oral mucosa is recovered and damaged tissues are repaired. Bexident Post (ISDIN, Spain) is a topical gel that contains chitosan, 0.2% chlorhexidine, allantoin and dexpanthenol. While this gel has many clinical indications, there are no published clinical trials evaluating its use in impacted mandibular third molar surgery. This study aims to clinically evaluate the efficacy of a gel containing chitosan, 0.2% chlorhexidine, allantoin and dexpanthenol on wound healing and reduction of postoperative side effects and complications after extraction of an impacted mandibular third molar. MATERIAL AND METHODS: A split-mouth design study was carried out on a total of 50 bilaterally and symmetrically impacted third molar extractions, which were randomly placed into either a control group (CG=25) or an experimental group (EG=25). Patients were all informed of the purpose of the study and provided written consent. All procedures were carried out by the same dental practitioner, in accordance with standard surgical protocol. A different dental practitioner, unaware of which treatment had been applied, provided follow-up care. The EG applied 10 ml of topical gel composed of chitosan, 0.2% chlorhexidine, allantoin and dexpanthenol to the surgical wound three times a day for 10 days, patients in the CG did not apply any gel. RESULTS: The groups were homogeneous insofar as potentially confounding variables. No significant findings were found regarding postoperative swelling and pain. Neither of the groups displayed poor healing or infectious complications of the wound during the postoperative period. In all the recorded follow-ups (Day 7 p=0.001, and Day 14 p=0.01), the wound's aesthetic appearance was better in the EG. Overall treatment tolerance was satisfactory and similar in both groups. CONCLUSIONS: The gel composed of chitosan, 0.2% chlorhexidine, allantoin and dexpanthenol did not aid in patients' postoperative comfort; however, improved wound healing was observed.